OSD
Main Menu
Press the [Menu] button to display the OSD Menu. Use the arrow keys to navigate the OSD menu, the [Home] button to make selections, and the [Return] button to go back.
Opening the On-Screen Display, provides the list of sub-menus seen below.
1. Exposure
2. Color
3. Image
4. P / T / Z
5. Noise Reduction
6. Communication Setup
7. Restore Defaults
8. Privacy Mode
9. [Enter] Select
10. [Menu] Exit
Exposure
| Function | Default Setting |
|---|---|
| 1. Mode | Auto |
| 2. Exp-CompMode | On |
| 3. ExpComp | -3 |
| 4. Backlight | Off |
| 5. Gain Limit | 5 |
| 6. Anti-Flicker | 60Hz |
| 7. Meter | Average |
| 8. DRC | 3 |
| 9. [Menu] | Back |
| 10. [Menu]** | Back |
1. (Exposure) Mode: Auto, Manual, SAE, AAE, Bright
2. Exp-CompMode: On, Off (Effective only in Full Auto mode).
3. Exp-Comp: -7 ~ +7 (This option is only available while ExpCompMode is On).
4. Backlight: Toggle Backlight Compensation. On, Off (This option is only available in Full Auto mode).
5. Bright: 0 ~ 17 (This option is only available in AAE, Bright mode)
6. Gain Limit: 0 ~ 15 (This option is only available in Full Auto, AAE, Bright mode).
7. Anti-Flicker: Off, 50Hz, 60Hz (This option is only available in Full Auto, AAE, Bright mode).
8. Iris: F1.8, F2.0, F2.4, F2.8, F3.4, F4.0, F4.8, F5.6, F6.8, F8.0, F9.6, F11.0, Close (This option is only available in Manual, AAE mode).
9. Meter: Average, Center, Smart, Top. (This option is only available in in Full Auto, SAE, AAE, & Bright)
10. Shutter: 1/30, 1/60, 1/90, 1/100, 1/125, 1/180, 1/250, 1/350, 1/500, 1/750, 1/1000, 1/1500, 1/2000, 1/3000, 1/4000, 1/6000, 1/10000 (This option is only available in Manual, SAE mode).
11. Gain: 0 ~ 7 (This option is only available in Manual mode).
12. DRC: 0 ~ 8
Color
| Function | Default Setting |
|---|---|
| 1. WB Mode | Auto |
| 2. RG Tunning | -2 |
| 3. BG Tunning | 3 |
| 4. Saturation | 90% |
| 5. Hue | 8 |
| 6. [Enter] | Select |
| 7. [Menu]** | Back |
1. WB Mode: Auto, Indoor, Outdoor, One Push, Manual, VAR
2. R Gain: Camera Red Gain value. Options include: 0 ~ 255 (Only available in Manual modes).
3. B Gain: Camera Blue Gain value. Options include: 0 ~ 255 (Only available in Manual modes).
4. ColorTemp: 2500K ~ 8000K (Only Available in VAR mode).
5. RG Tuning: -10 ~ +10 (Only Available in Auto, One Push, VAR mode).
6. BG Tuning: -10 ~ +10 (Only Available in Auto, One Push, VAR mode).
7. Saturation: Camera Saturation value. Options include: 20% - 200%
8. Hue: Camera Hue value. Options include: 0 ~ 14
Image
| Function | Default Setting |
|---|---|
| 1. Luminance | 8 |
| 2. Contrast | 9 |
| 3. Sharpness | 9 |
| 4. Flip-H | Off |
| 5. Flip-V | Off |
| 6. B&W-Mode | Off |
| 7. Style | Default |
| 8. [Menu] | Back |
1. Luminance: Brightness value. Options include: 0 ~ 14
2. Contrast: Contrast value. Options include: 0 ~ 14
3. Sharpness: Sharpness value. Options include: Auto, 0 ~ 11
4. Flip-H: Flip image horizontally. Options include: On, Off
5. Flip-V: Flip image vertically. Options include: On, Off
6. B&W Mode: Toggle Black & White mode.Options include: On, Off
7. Style: Default, Norm, Bright, PC
P / T / Z
| Function | Default Setting |
|---|---|
| 1. SpeedByZoom | On |
| 2. AF Zone | Center |
| 3. AF Sense | Normal |
| 4. L/R Set | STD |
| 5. Preset Freeze | Off |
| 6. Zoom Mode | Optical |
| 7. Magnification | Off |
| 8. Call Preset Speed | 12 |
| 9. Pre Zoom Speed | 5 |
| 10. [Menu] | Back |
1. SpeedByZoom: On, Off
2. AF (Auto-Focus) Zone: Front, Top, Center, Bottom
3. AF (Auto-Focus) Sense: High, Normal, Low
4. L/R Set: STD, REV
5. Preset Freeze: On, Of
6. Zoom Mode: Digital, Optical, Super
7. Magnification: Available only in Digital Zoom Mode: 2x, 4x, 8x, 16x
8. Call Preset Speed: 1 ~ 24
9. Pre Zoom Speed: 0 ~ 7
Noise Reduction
Adjusts the levels of digital noise reduction.
| Function | Default Setting |
|---|---|
| 1. NR3D | 7 |
| 2. Menu | Back |
Setup
| Function | Default Setting |
|---|---|
| 1. Language | EN |
| 2. Auto Focus L | Off |
| 3. OSD TimeOut | Off |
| 4. Motion Sync | |
| 5. Focus Limit | |
| 6. Auto Inspect | |
| 7. Video Mode | |
| 8. Other | |
| 9. [Menu] | Back |
1. Language: Options include: English, Chinese
2. Auto Focus L: Lock the focus in the current position. Options include: Off, On
3. OSD TimeOut: Auto close OSD Menu. Options include: Off, 2.5min
4. Motion Sync: Synchronize pan, tilt, and zoom to arrive at the preset simultaneously. Options include: Off, On (Can be reached by entering the Setup > Motion Sync). Max Speed: The maximum speed Motion Sync will use when calling presets. Options include: 185 ~ 230 (increments of 5)
5. Focus Limit: Define a range the camera can focus within. Options include: Off, On (Can be reached by entering Setup > Focus Limit).
- Furthest Pos: Define the farthest focus position Options include: INF, 1m ~ 20m
- Nearest Pos: Define the nearest focus position Options include: INF, 1m ~ 20m
6. Video Mode: Configure video output settings
- SDI-3G Mode: Set the SDI level. Options include: Level-A, Level-B
- Video Output: Set the video output to SDI or HDMI. Options include: HDMI, SDI
- DVI Mode: Define HDMI Data Transfer type.Options include: HDMI, DVI
7. Other:
- Auto Inversion: Toggle auto inversion. Options include: Off, On
- Tally Mode: Toggle ability to acknowledge Tally Light command. Options include: Off, On
- USB Audio: Toggle USB audio embedding. Options include: Off, On
- USB 2.0 Function: Define how the USB port is used. Options include: UVC, Host
- Display Info: The ability to display OSD message overlays on the video output.
Communication Setup
This menu is used to adjust the camera's control methods and settings.
| Function | Default Setting |
|---|---|
| 1. Protocol | Visca |
| 2. V_Address | 1 |
| 3. V_AddrFix | Off |
| 4. Net Mode | Serial |
| 5. Baudrate | 9600 |
| 6. [Menu] | Back |
1. Protocol: Adjusts the camera's control protocol. VISCA, PELCO-D, PELCO-P, Auto.
2. V_Address: VISCA protocol camera address Options include: 1 ~ 7
3. V_AddrFix: When enabled, the Visca address will not change. Options include: Off, On
4. Net Mode: Control type Options include: Serial, Parallel
5. Baudrate: Baudrate control speed Options include: 2400, 4800, 9600, 38400
6. P_D_Address: Pelco-D protocol address Options include: 0 ~ 254
7. P_P_Address: Pelco-P protocol address Options include: 0 ~ 31
Restore Default
This menu is used to restore the camera's factory default settings.
| Function | Default Setting |
|---|---|
| 1. P/T Limit | Reset |
| 2. Press [Enter] | Confirm |
| 3. Press [Back] | Cancel |
| 4. Select [Enter] | |
| 5. [Menu] | Back |
Press the [Enter] button to confirm. All camera parameters will return to default, including IR remote & VISCA Addresses.
Privacy Mode
| Function | Default Setting |
|---|---|
| 1. Privacy Mode | |
| 2. Select [Enter] | |
| 3. [Menu] | Back |
Privacy Mode can be enabled from the Privacy Mode menu, or by pressing the IR Remote's Privacy Mode button to turn the camera head down and back, and disable the video feed.
To disable Privacy Mode press the Privacy Mode button again.