Skip to main content

Device Management

The Device Management page allows you to define new cameras and adjust previously configured cameras.

image

Group 1-4: Camera groups can include up to 7 channels (Camera IP Addresses) and allow you to quickly make modifications to them.

Group 5: A specialized group allowing up to 225 channels (Camera IP Addresses).

Channel: Joystick control address.

IP: Shows the IP address of the saved network camera.

Port: The control port of the saved network camera.

Type (Network): The control protocol of the saved network camera.

Baudrate: The baud rate of the saved camera.

Address: The camera control address of the saved analog camera.

Type (Analog): The control protocol of the saved analog camera.

Operate: The Operate button lets you click “modify” to edit the settings of the saved camera, click “snap” to take a snapshot of the camera’s current view, or click “Home” to send the selected camera to the home position.

Modify Button:

image

Clicking the Modify Button opens a sub-menu from which you can make numerous changes to the selected camera.

  • Connection:
    • Network/Analog: Change the camera from Network based control to Analog.
    • Protocol: Select the protocol you want the camera to use.
      • Options Include:
        • VISCA UDP
        • VISCA TCP
        • VISCA UDP SONY
        • VISCA WEBSOCKET
        • PANASONIC
        • ONVIF
        • NDI
    • Address: Lets you view or change the IP address of the selected camera.
    • Control Port: Defaulted at 1259
  • HDMI Output: Determine a URL destination for the Joystick's HDMI output.

image

  • Trigger: Assign the camera to a custom button. These custom buttons will be further explained in the custom section.

images