Power
The Move SE can be powered using the included power supply or Power over Ethernet. Please make sure all connections are secure when using either method.
When the camera is turned on, it will perform a short startup sequence going through its full range of motion.
Power over Ethernet, or PoE, provides power and network connection. To power your camera over Ethernet, you will need a PoE source that supports PoE (802.3af). We recommend connecting your camera to the switch for peak performance using Cat 6 cabling or better. See the example of a power over Ethernet connection below.
Camera Startup
PTZOptics cameras perform a short startup sequence going through their full range of motion when powered on. (Stationary cameras or box cameras will also perform a startup sequence, going through their full zoom range.)
When the sequence is complete, the camera will stop and return to preset 0, as long as you've previously set preset 0, or the Home position.
Device Powering Options
| Product | Power Supply | Power Consumption | Power Over Ethernet Type |
|---|---|---|---|
| Move 4K | JEITA type (DC IN 12V) | Max 2.0A | PoE+ (802.3at) |
| Move SE | JEITA type (DC IN 12V) | Max 2.0A | PoE (802.3af) |
| Link 4K | JEITA type (DC IN 12V) | Max 2.0A | PoE+ (802.3at) |
| Studio Pro | JEITA type (DC IN 12V) | Max 2.0A | PoE (802.3af) |
| Studio 4K | JEITA type (DC IN 12V) | Max 2.0A | PoE (802.3at) |
| Studio SE | JEITA type (DC IN 12V) | Max 2.0A | PoE (802.3at) |
| SimplTrack3 | JEITA type (DC IN 12V) | Max 1.0A | PoE (802.3af) |
| PT-SUPERJOY-G1 | JEITA type (DC IN 12V) | Max 0.5A | PoE (802.3af) |
| PT-JOY-G4 | JEITA type (DC IN 12V) | Max 0.5A | PoE (802.3af) |