Movement and Presets HTTP API

Use these commands to pan, tilt, zoom, focus, return home, reset movement, and save or recall presets. Start with HTTP API getting started, then use the specific reference command below. For byte-based control, see VISCA movement commands.

Commands

Focus In/Out/Stop

Function: Controls the focus direction with optional speed parameter

Home Preset

Function: Moves the camera to the home position

Pan/ Tilt Reset

Function: Send command to reset the Pan/ Tilt on the camera.

Pan/Tilt Control

Function: Send commands to control the Pan/Tilt direction with optional speed parameters

Position Recall

Function: Sends a command to recall the direct position of the camera.

Preset Commands

Function: Sets or Calls camera position/ settings from preset assigned values 0-89, 100-254

Preset Commands with Speed

Function: Calls camera position from preset with specified pan, tilt, and zoom speeds

Snap Focus

Function: Controls the Snap Focus command

Zoom Recall

Function: Sends a command to Recall the Direct Zoom Position with Zoom Speed

Zoom In/Out/Stop

Function: Controls the Zoom direction with optional speed parameter