Skip to main content

System Info

Image of the of the system settings

The System Settings page gives access to the HTTPS Settings, IR Remote Channel Selection, Access Settings, Firmware Check, Restore Default (Basic), Firmware Upload & Restore Default (Advanced) sections.

HTTPS Settings

  • HTTPS Certificate: Upload a HTTPS Certificate from your computer.
  • HTTP Port: The HTTP Port is how you reach the web interface of your camera (http://[Camera IP]:[port]/)

IR Remote Channel Selection

  • 1 – 4 Button: Define the communication channel the camera utilizes with the remote control. This allows you to easily use multiple cameras with a single IR remote.

Access Settings

  • Admin Name: Administrator username login. This username can not be changed.
  • Admin Password: Administrator password. If you desire to change the password, all letters, numbers, and specifically “!@#$^()” can be used, up to 15 characters. Please note the circles in the field are encrypted and do not reflect the password saved on the camera.
  • Guest Login: Enable or Disable. Sending the IP address to a guest will provide the guest with a limited version of the camera Web UI. Standard camera operations will be available, but administrative privileges will not be.
  • Guest Name: Guest username login. This username can not be changed.
  • Guest Password: Guest password. If you desire to change the password, all letters, numbers, and specifically “!@#$^()” can be used, up to 15 characters. Please note the circles in the field are encrypted and do not reflect the password saved on the camera.