Skip to main content

Streaming

NDI® HX3 Connection​

The NDI HX3 connection allows you to connect and control the camera through any NDI compatible hardware or software on a Local Area Network. Once the camera is setup on a LAN, you can utilize the NDI HX3 connection.

NDI Setup​

  1. Download and install the latest NDI Tools from NDI Tools

  2. This camera's NDI settings can be configured from the camera’s web interface in the NDI settings tab.

  3. Select the camera within the NDI compatible device. The NDI feed will utilize the camera’s device-friendly name.

info

Vizrt NDI®, NDI 4, 5, 6. NDI HX, NDI HX2, and NDI HX3 are all registered trademarks by Vizrt. Please note that your NDI License key is non-transferable.

RTMP Streaming​

This camera can send two RTMP(S) streams. To use your camera with an RTMP stream, you will need a Stream URL & Stream Key, from a CDN or from the social network to which you want to stream.

Steps​

  1. Once you have the Stream URL & Stream Key, log into Web UI.

  2. Navigate to the Streaming Settings page. In the RTMP(S) Settings section, enter the Stream URL & Stream Key you received from the CDN or social network.

  3. Ensure you turn your RTMP stream “On” by enabling the appropriate stream.

RTSP Streaming​

The Move 4K is able to send an RTSP stream for viewing video through a LAN or Internet connection.

Using VLC or another RTSP enabled video program, type the following string into your network streaming section:

  • Stream 1 (HD):

    • rtsp://[IP ADDRESS]:554/1

  • Stream 2 (SD):

    • rtsp://[IP ADDRESS]:554/2

If you do not know the IP address of your camera, refer to the Finding the Camera's IP Address section.