01/12/2026

Move SE 12X - v9.1.46Move SE 20X - v9.1.34Move SE 30X - v9.1.39

New Features

NDI 6 Upgrade: Upgraded NDI support from NDI 5 to NDI 6 for improved compatibility, performance, and access to the latest NDI protocol features.
NDIHX3 Support: Added support for NDIHX3. To enable, set the camera to HDMI-SDI/IP and toggle NDIHX3 to On. HX3 profiles can then be defined as needed.
Audio Sample Rate Support: Added support for 44.1 kHz and 48 kHz audio sample rates (previously limited to 32 kHz).
Resolved an RTMP issue with compatibility errors when connecting to CDNs related to frame rate, keyframe intervals, and bitrate.
Audio Settings Page Reorganized: Encoding and decoding settings were restructured for improved clarity and user experience. Settings are now grouped more logically to help users configure audio more efficiently.

Subject Switching: Added the ability to switch between tracked subjects using left/right arrows via web UI, IR remote, and VISCA joystick commands.
Tracking Presets: Added dedicated presets for Auto Tracking control:

Preset 150 = Tracking ON
Preset 151 = Tracking OFF

HTTP Movement Status Query: Added a route to allow users to query whether the camera is actively moving. The endpoint returns a boolean response indicating Pan, Tilt, Zoom, or Focus motion.

note

This status does not report focus movement when Auto Focus is enabled.

GET /api/v1/info/is-moving

Example:

GET http://192.168.100.88/api/v1/info/is-moving

Returns:

{
  "isMoving": false
}

Guest Access Controls: Guest users are now limited to appropriate routes and no longer have access to SRT or RTMP credentials.
Onvif Authentication Default Enabled: ONVIF authentication is now enabled by default to align with updated security protocols and ensure the ONVIF route is protected out of the box.
Exposure Bright Mode: Added Bright as an exposure mode option.
Updated Encoding Protocol Info Symbol: Added a new info icon next to the Encoding Protocol selection in the web UI. It provides descriptions of each protocol.

Tracking Sensitivity: Improved tracking stability at full zoom by reducing over-sensitivity to minor subject movements.
Pan/Tilt/Zoom Stop Independence: VISCA Pan/Tilt stop commands no longer interrupt Zoom.
Home + Navigation Commands: Resolved an issue where recalling Home position followed by HTTP navigation commands caused the camera to stop zooming prematurely.
Relative Tilt Bug: Fixed a bug where the camera would tilt up when at the lower tilt limit and receiving a Relative Position Down command.
RTMP CDN Errors: Resolved frame rate, bitrate, and keyframe issues blocking some RTMP streaming. Note: When RTMP streaming to YouTube using camera video templates, bitrate errors may occur. Resolution: Adjusting the camera’s video settings to align with YouTube’s video requirements will improve streaming stability and functionality.
Snapshot Stability: Fixed a long-term uptime issue where snapshot images would eventually fail.
Time Server Application Failures: Fixed behavior where valid NTP time servers (like IPs with .100 octets or certain hostnames) failed through the Web UI but worked via HTTP.
NTP Fallback: Fixed a bug preventing consistent NTP server connection after boot, causing fallback to system time.
NTP Time Zones: Resolved an issue where certain time zones could not be set from the web UI.
Audio Out Menu Simplified: Removed Off option since audio disablement is handled by Audio Codec toggle.

Cannot Set Some NTP Servers via Web UI: Some domain strings (for example, time-a-g.nist.gov) fail via Web UI but work using the HTTP API commands.
Time Zone Compatibility: Time zone handling may cause SSL certificate renewal failures. Ongoing adjustments are needed.
NTP Reboot: Changing the timezone in NTP settings requires a camera reboot.
Pan/Tilt Limits Not Persistent: Pan/Tilt Limits are not retained after a reboot; they reset instead of persisting after the reboot.
Incorrect VISCA over IP Responses: Changing the Serial VISCA address alters IP response headers (for example, 90 becomes a0, b0, and so on).
Pelco P/D Zoom Stop Issue: Pelco P/D Zoom and Focus Stop commands are not received, causing the camera to zoom continuously to its limit.
NDI Studio Monitor Hotkeys: Ctrl+Right and Ctrl+Down precision movement do not work. Other Ctrl+Arrow keys function as expected.
NDI HX3 Video Template Mismatch: When NDI HX3 is enabled, switching to certain video modes (for example, USB/IP/HDMI-SDI_30FPS) disables HX3 but the Video Template does not reflect the correct available options or default values.
NDI HX3 Video Framerate Mismatch: When NDI HX3 is enabled, the Framerate is grayed out, and may not default to 60Hz or 50Hz defined by the certification standards.
ONVIF Preview Image Fails: No image preview when HTTP Auth is enabled.