07/01/2026

Move SE 12X - v9.1.56Move SE 20X - v9.1.38Move SE 30X - v9.1.42

Bug Fixes

• Incorrect VISCA over IP Response: Fixed a bug causing the first byte of the camera’s VISCA response to increment when the serial VISCA address was modified. The camera’s VISCA over IP response is no longer improperly linked to its serial address.

Known Issues

1. Cannot Set Some NTP Servers via Web UI: Some domain strings (e.g., time-a-g.nist.gov) fail via Web UI but work using the HTTP API commands.

2. Time Zone Compatibility: Time zone handling may cause SSL certificate renewal failures. Ongoing adjustments are needed.

3. NTP Reboot: Changing the timezone in NTP settings requires a camera reboot.

4. Pan/Tilt Limits Not Persistent: Pan/Tilt Limits are not retained after a reboot; they reset instead of persisting after the reboot.

5. Pelco P/D Zoom Stop Issue: Pelco P/D Zoom and Focus Stop commands are not received, causing the camera to zoom continuously to its limit.

6. NDI Studio Monitor Hotkeys: Ctrl+Right and Ctrl+Down precision movement do not work. (Other Ctrl+Arrow keys function as expected.)

7. NDI HX3 Video Template Mismatch: When NDI HX3 is enabled, switching to certain video modes (e.g., USB/IP/HDMI-SDI_30FPS) disables HX3 but the Video Template does not reflect the correct available options or default values.

8. ONVIF Preview Image Fails: No image preview when HTTP Auth is enabled.

9. Audio embedded over the USB output may sound distorted. To resolve this, set the sample rate to 44.1 kHz or 32 kHz, apply the setting, and reboot the camera. After rebooting, the camera can be set back to 48 kHz if needed.