SimplTrack 3 Password Reset Guide

Default Admin Credentials

The default credentials are username admin, password admin.

For other camera models covered by this guide, see the Password Reset overview.

IR Remote Command (SimplTrack3)

caution

This password reset command will only work on SimplTrack3 cameras with firmware version 1.0.59 or later! If you're not sure what firmware version your camera is on, or you don't have the IR remote, please email [email protected]

With the camera powered on, use the included IR remote to issue the password reset command: Call, 3, 1, 0, Enter.

info

On the SimplTrack3 remote, the Enter button is the right-angled arrow button located at the bottom right of the remote.