IR Remote

SimplTrack3 Remote Button Descriptions

1. Home Button Press to send the camera to the preset Zero position. This is the same position the camera assumes after it’s been powered on.

2. Camera Selection Buttons Used to switch between IR channels when using multiple cameras.

3. Power Button Used to the turn the camera on and off.

4. Shortcut Buttons (F1, F2, F3, F4) F3: Start Tracking. F4: Stop Tracking

5. Focus Choose between Auto or Manual focus modes.

5.a “Trig Focus button” enables auto focus whenever the camera is zoomed in. Near / Far allows focus adjustment while in manual focus mode.

6. Pattern Buttons Non-functional

7. Iris Use the Open / Close options to open and close the Iris.

7.a Reset the Iris to the default value using the “Iris Reset button.”

8. BLC Button Used to Enable or Disable the Backlight Compensation.

9. Zoom Buttons Used zoom in or out.

10. Menu Used to open or close the On Screen Display Menu.

11. Back Button Used to return to a previous menu, while in the OSD Menu.

12. Directional Buttons In the OSD Menu: Navigate through the Menus. Outside the OSD Menu: Pan and Tilt the Camera.

13. Data Button Non-functional

14. Number Keys Used to input numbers.

15. Clear Button Used to cancel an action.

16. OSD Enter Used to make selections in the OSD menu