Skip to main content

OSD

Press the [Menu] button to display the OSD Menu. Use the arrow buttons to navigate the OSD menu, the [Enter] button to make selections, and the [Menu] button to go back a sub-menu.

Opening the On-Screen Display, provides the list of sub-menus seen below.

1. Image
2. Exposure
3. Color tone
4. Camera
5. PTZ
6. System
7. Device Info

Image

The following settings can be adjusted from the Image menu:

Lens Image
OptionsTracking Lens, Reference Lens
DefaultTracking Lens
Sharpness
Options0 ~ 11
Default5
Brightness
Options0 ~ 14
Default5
Contrast
Options0 ~ 14
Default7
Gamma
Options0 ~ 4
Default2
2DNR (2D Noise Reduction)
Options0 ~ 7
Default3
3DNR (3D Noise Reduction)
Options0 ~ 7
Default3
DRC (Dynamic Range Control)
Options0 ~ 5
Default0
Mirror
OptionsOn, Off
DefaultOff
Flip
OptionsOn, Off
DefaultOff

Exposure

The following settings can be adjusted from the Exposure menu:

Lens Exposure
OptionsTracking Lens, Full-view
DefaultTracking Lens
NoteChoose whether the exposure settings affect the Tracking Lens only, or the full-view lens.
Full-view Follow
OptionsOn, Off
DefaultOff
NoteWhen toggled on, the Tracking & Full-view lenses will adjust Exposure settings simultaneously.
Exposure (Modes)
OptionsAuto, Manual, Shutter, Iris, Bright
DefaultAuto
Anti-Flicker
OptionsOff, 50HZ, 60HZ
Default60HZ
NoteChoose Off, 50HZ, or 60HZ to keep certain light sources such as florescent bulbs from flickering in the image.
BLC (Back Light Compensation)
OptionsOn, Off
DefaultOff
NoteEnables backlight compensation to improve visibility in scenes with strong back lighting.
EXP-Comp
OptionsOn, Off
DefaultOn
NoteEnables automatic exposure compensation based on lighting conditions.
Level
Options-7 ~ +7
Default0
Gain
Options0 to +14
Shutter
Options1/1, 1/2, 1/4, 1/8, 1/15, 1/30, 1/60, 1/90, 1/100, 1/125, 1/180, 1/250, 1/350, 1/500, 1/725, 1/1000, 1/1500, 1/2000, 1/3000, 1/4000, 1/6000, 1/10000
Iris
OptionsCLOSE, F1.6, F2, F2.4, F2.8, F3.4, F4, F4.8, F5.6, F6.8, F8, F9.6, F11, F14

Color Tone

The following settings can be adjusted from the Color Tone menu:

WB Mode
OptionsAuto, Manual, Indoor, Outdoor, Static(VAR), One Push (OPWB)
DefaultAuto
R. Gain
OptionsVaries based on WB Mode
Default0
While in Auto WB Mode:-7 to +7
While in Manual WB Mode:0 to 255
G. Gain
OptionsVaries based on WB Mode
Default0
While in Auto WB Mode:-7 to +7
While in Manual WB Mode:N/A
B. Gain
OptionsVaries based on WB Mode
Default0
While in Auto WB Mode:-7 to +7
While in Manual WB Mode:0 to 255
WB-SENSI
OptionsLOW, MIDDLE, HIGH
DefaultMIDDLE
Hue
Options0 ~ 14
Default7
Saturation
Options0 ~ 14
Default7

Indoor Mode

Indoor Mode Settings
OptionsSaturation: 0 to 14

Outdoor Mode

Outdoor Mode Settings
OptionsSaturation, Hue
OptionsSaturation: 0 to 14
OptionsHue: 0 to 14

Static(VAR) Mode

Static(VAR) Mode Settings
OptionsColor Temp.: 2800K to 6500K by increments of 100, Saturation: 0 to 14, Hue: 0 to 14
One Push (OPWB) Mode Settings
OptionsClickable button to initiate one-push white balance calibration

Camera

The following settings can be adjusted from the Camera menu:

Run Scene
OptionsIndoor, Outdoor, Low Light, Custom
DefaultIndoor
Digital Zoom
OptionsOn, Off
DefaultOff
Zoom Times
OptionsX1, X2, X3, X4, X5, X6, X7, X8
DefaultX1
NoteOnly available when digital zoom is turned on. Digitally multiply the zoom magnification of the camera.

Pan Tilt Zoom

The following settings can be adjusted from the PTZ menu:

Pan Speed
Options1 ~ 24
Default5
Tilt Speed
Options1 ~ 20
Default5
PTZ TRIG AF (Auto-focus)
OptionsOn, Off
DefaultOn
Power Up
OptionsHome, Preset 1, Preset 2, Preset 3
DefaultHome

System

The following settings can be adjusted from the System menu:

Protocol Address
Options1 ~ 7
Default1
IR Address
Options1 ~ 4
Default1
Mount Mode
OptionsStand, Ceiling (Inverted)
DefaultStand
Protocol
OptionsVisca, Pelco-D, Pelco-P
DefaultVisca
Baud Rate
Options2400, 4800, 9600, 38400
Default9600
Video Format
Options1080p 60/50/30/25, 720p 60/50
Default1080p 60
Language
OptionsEnglish, Chinese
DefaultEnglish
Display Info
OptionsOn, Off
DefaultOff
Track Type
OptionsTracking, Framing
DefaultTracking
Defaults
OptionsConfirm, Cancel
DefaultConfirm