Network Settings

IP Configuration Type: Choose between DHCP or setting a Static IP.

IP Address: Displays the camera’s IP address.

Gateway: Displays the camera’s Gateway.

DNS Address: Displays the camera’s DNS.

MAC Address: Displays the camera’s Mac Address.

DHCP Timeout: Displays time the camera will wait for a DHCP address before going to the fallback address.

Static Fallback Address: Displays the camera’s fallback address. This is a pre-configured IP address that is used as a backup or fail-safe when dynamic or preferred addresses are unavailable.

Static Fallback Mask: Displays the camera’s fallback mask. This is a network an operating system may use when it cannot obtain a valid network configuration.

Static Fallback Gateway: Displays the camera’s fallback gateway. This is a pre-configured network gateway address that a device uses if its primary gateway is unavailable

NTP Time Sync: Toggle On or Off. (Network Time Protocol) This synchronizes the camera’s interanl clock with that of your network.

NTP Time Zone: Set your time zone.

Server Address: Choose between Time Windows, Time Mac, or Custom NTP

Time Interval: Defines how frequently the camera will query the NTP Server (in seconds).