Overview
Each microphone reports audio zone activity to the Voice Tracking engine over your local network, enabling automated PTZ camera control and optional switcher cuts.
Network Requirement
All microphone systems must be on the same local network as the PTZOptics camera. Verify that your network does not block communication between the microphone and camera IP addresses on the configured ports.
Supported Systems at a Glance
| Microphone | Manufacturer | Coverage | Special Requirements |
|---|---|---|---|
| ATND1061 | Audio Technica | Beamforming array | LK and DAN variants supported |
| HDL410 | Nureva | Up to 35 ft × 55 ft | Nureva Console setup + Local Integrations |
| MXA920 | Shure | Steerable coverage zones | Automatic Coverage must be enabled |
| TeamConnect Ceiling 2 | Sennheiser | Circular, ~9m radius | Decibel Threshold available |
| TeamConnect Ceiling Medium | Sennheiser | Smaller rooms | Decibel Threshold available |
| Sennheiser Speechline Digital wireless | Sennheiser | Coverage depends on mics | Decibel Threshold available |
| Confero | Televic | Conference-focused array | — |
| RM-CG | Yamaha | Ceiling-mounted beamforming | — |
Brand Guides
Choose your microphone brand for device-specific setup instructions: