Skip to main content

Getting Started

This guide walks you through powering on your Rise 4K, connecting your video output, completing the startup sequence, and finding your camera on the network.

What You Need​

Connection / SetupRequired Equipment
PowerIncluded 12V DC power supply or a PoE++ (802.3bt) network switch/injector
For Network Video & Web UIEthernet cable (Cat5e or better) connected to the same network as your computer or production device
For HDMI VideoHDMI cable connected to a monitor, TV, switcher, or capture card with an HDMI input
For SDI Video75-ohm 3G-SDI cable (BNC) (up to 1080p60) or 75-ohm 12G-SDI cable (BNC) (up to 4K60) connected to an SDI switcher, capture card, or monitor
For USB Video or ControlUSB cable connected to a computer USB port (USB carries data only)
Connection / SetupRequired Equipment
PowerIncluded 12V DC power supply or a PoE++ (802.3bt) network switch/injector
For Network Video & Web UIEthernet cable (Cat5e or better) connected to the same network as your computer or production device
For HDMI VideoHDMI cable connected to a monitor, TV, switcher, or capture card with an HDMI input
For SDI Video75-ohm 3G-SDI cable (BNC) (up to 1080p60) connected to an SDI switcher, capture card, or monitor
For USB VideoUSB cable connected to a computer USB port (USB carries data only)
Connection / SetupRequired Equipment
PowerIncluded 12V DC power supply or a PoE (802.3af) network switch/injector
For Network Video & Web UIEthernet cable (Cat5e or better) connected to the same network as your computer or production device
For HDMI VideoHDMI cable connected to a monitor, TV, switcher, or capture card with an HDMI input
For USB VideoUSB A-C cable connected to a computer USB port (USB carries data only)

Step 1: Connect Power​

Choose one of the following power methods:

Option A: 12V DC Power Supply​

  1. Connect the included 12V DC power supply to the camera's DC input.
  2. Plug the power supply into a standard wall outlet.

Option B: Power over Ethernet PoE++ (802.3bt)​

  1. Connect an Ethernet cable from a PoE++ (802.3bt) switch or injector to the camera's LAN port.
  2. The camera will power on automatically.
Requirement

Ensure your switch or injector supports PoE++ (802.3bt), not just PoE (802.3af).

EEE: Energy-Efficient Ethernet

Please ensure your PoE switch or injector is NOT configured for EEE: Energy-Efficient Ethernet Mode or Power Saving Mode. These features may limit the power available to the camera, leading to unstable operation or insufficient power delivery.

Step 2: Connect Video Output​

Connect one or more video outputs below based on your production workflow.

Network Video (Ethernet / PoE)​

  1. Connect an Ethernet cable (Cat5e or better) from your network switch or router to the camera's LAN port.
  2. Your Ethernet connection carries both network video (RTSP, RTMP(S), SRT, or NDI|HXDante AV-H, RTSP, RTMP(S), or SRTRTSP, RTMP(S), or NDI|HX) and camera control.

HDMI​

  1. Connect an HDMI cable from the camera's HDMI output to your monitor, TV, switcher, or capture card's HDMI input.
HDMI input vs output

Many computers have HDMI outputs only, not inputs. If your computer lacks an HDMI input, use a capture card.

SDI​

No SDI Output on Studio Pro

The Studio Pro outputs video over HDMI, USB 3.0 Type-C, and IP / NDI|HX3 and does not include an SDI BNC output.

  1. Connect a 75-ohm 3G-SDI cable (BNC) from the camera's SDI output to your video switcher, capture card, or monitor's SDI input.
  1. Connect a 75-ohm 3G-SDI cable (BNC) or 12G-SDI cable (BNC) from the Rise 4K's 3G-SDI or 12G-SDI output to your video switcher, capture card, or monitor's SDI input.
4K requires compatible equipment

Although 3G-SDI and 12G-SDI use the same BNC connector, your entire signal path must support 12G-SDI to output or receive 4K video. If any device in the chain only supports 3G-SDI, your workflow will be limited to HD resolutions or may not work at all.

USB​

  1. Connect a USB cable from the camera's USB output to your computer.
  2. In your application's video settings (Zoom, Teams, OBS, or vMix), select Rise 4K as the video device.
USB does not power the camera

USB carries data only. The Rise 4K still requires 12V DC power or PoE++ (802.3bt).

Step 3: Wait for Startup Sequence​

When powered, the Rise 4K camera performs a startup sequence:

  1. Self-calibration: During startup, the camera moves through its full range of motion while both the green (Standby) and blue (Power) LEDs are on. When self-calibration is complete, the camera returns to Preset 0.
  2. Ready: Once the camera stops moving and the green LED turns off, your camera is ready to use.

When powered on, the Rise 4K camera performs a short startup sequence going through its full optical zoom range. When the sequence is complete, the camera stops and returns to Preset 0 (if previously saved) or its default position.

Step 4: Find Your Camera on the Network​

The Rise 4K camera supports mDNS, so you can reach it by hostname without knowing the IP address.

  1. Open a web browser on any device connected to the same network.

  2. Type the following address and press Enter:

    http://ptzoptics.local/

  3. This will take you to the Horizon Web UI.

  4. The camera's IP address will be displayed in the search bar. We recommend noting it down for future reference.

First Time Logging In?

You will be prompted to set up a password on your first login.

  • Default Username: admin
  • Create a strong password.
Multiple cameras?

Give each camera a unique Device ID from the Horizon Web UI Device Info tab. Then reach each camera by its ID: http://camera-one.local, http://camera-two.local, etc.

You're Finished​

Your Rise 4K is now connected, outputting video, and ready to access from the Horizon Web UI.

More Information on Camera Control

The Rise 4K can be controlled using the Horizon Web UI, the included IR remote, network controllers, and serial joystick controllers. To learn more about camera control, see Control Options and Using the IR Remote.

Learn How to Set Camera Presets

Save and recall camera framing and image settings using the Horizon Web UI, the IR remote, or a PTZ joystick controller. To learn how to set, call, and clear presets on your Rise 4K, see Preset Camera Positions.

Next Steps​

Ask PTZOptics AI

Ask a question about PTZOptics products or documentation.